The Apollo 70-600 series two-piece three-port diverting ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual control. This ball valve is three-port diverting to regulate flow among three sections of pipe. Its maximum pressure is 400 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG). It has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and a PTFE seal reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.
With so many on offer these days, it is great to have a name you can trust. This item is certainly that and will be a perfect buy. The distributor have added some great touches and this equals great value.
You can trust this review, i hope you can try to buy this product and then you know this product good or no. Next time you can make a review for another people.
3-way ball valve for brew stand
I use this ball valve to select between the brew pump pulling between the mash tun and hot liquor tun. Works perfectly. There is no off but the is fine for my application.
Click here to read the full review for more information about this product.
Used for greywater from laundry machine
Apollo 70-600 Series Bronze Ball Valve, Two Piece, 3-Port Diverting, Lever, 1" NPT Female
Would recommend for a quick delivery for the use of diverting to two locations the greywater coming from a laundry machine. Does well. Thanks.
well made but not as useful as it could be
well made. good seals, threads and action.
there is no 'off'. also there is no way to switch from 1-2 to 2-3 without port 1 and 3 mixing.
Product Features :
- Made of bronze for higher strength and corrosion resistance than brass
- Zinc-plated steel lever handle with vinyl sleeve for manual control
- Three-port diverting valve to regulate flow among three sections of pipe
- Pounds per square inch (gauge) (psig) rating of 400 for water, oil, and gas (WOG)
- Female National Pipe Taper (NPT) threads on both ends for use with male threaded pipes
Rating : 4.3 out of 5.0
No comments:
Post a Comment